What Are Anti-corrosion Requirements for Outdoor Gantry Crane ?

How to do anti-corrosion for your outdoor use outdoor gantry crane? Check outdoor gantry crane anti-corrosion requirements to prolong your outdoor crane lifespan and ensure safety.

Anti-corrosion construction requirements for outdoor gantry cranes

Goliath gantry cranes generally work outdoors, and the working environment is relatively harsh, so anticorrosion maintenance of the outdoor gantry crane is required. What are the anti-corrosion requirements for outdoor gantry cranes that must be strictly followed?

• Before using the anticorrosive outdoor gantry crane, hanging ladder, and hanging basket, carefully inspect the quality of the hooks and welds. Onlyuse them after they are qualified. Hanging ladders and hanging baskets should be inspected on a regular basis while in use. The erected platform must meet national safety standards and may begin work only after passing a safety inspection and acceptance.
• Anticorrosive aerial workers of outdoor gantry cranes must wear double insurances, wear safety belts and caps, and perform labor protection in accordance with relevant requirements. Before the anti-corrosion construction of the outdoor gantry crane, all construction personnel should make safety technical disclosures, strictly follow the technical plan, and must not change the technical plan without authorization. If the plan needs to be changed, it must be reported to the superior technical authority for approval. Lifting operations must be directed by a dedicated person and supervised by a dedicated person; the command signal must be unified, clear and clear.
• Smoking and fire are forbidden at the painting site, and corresponding fire-fighting equipment should be equipped. When the steel pipe installation team cuts out welding scars such as door legs, they must pay attention to fire prevention and prevent damage to cables or electrical equipment. If necessary, use carbon arc gouging to goug the weld scars and equip them with fire extinguishers for on-site monitoring.
• Choose the sling correctly, not replace the big one with the small one, and replace the new one with the shoddy. The electricity used for painting construction shall comply with relevant regulations.
• Overloading of the hanging basket is strictly prohibited, and there should be no more than 2 operators at a time. The construction personnel on the hanging basket are strictly prohibited from sticking out of the hanging basket. There should be no more than 4 workers on the same hanger, and no more than 2 workers on the same working position.
• During the anti-corrosion construction process of the outdoor gantry crane, special personnel should be assigned to look after the special construction tooling, and it is strictly forbidden to throw debris.
• Resolutely obey the management of on-site safety officers. The operators on the hanging basket must tie double safety ropes, and the hanger should be laid with safety nets and railings. Strictly follow the safety operation management regulations of the headquarters.
• The flammable waste in the anti-corrosion coating construction of the outdoor gantry crane should be properly stored and burned regularly.

Doing a good job in the anti-corrosion work of the outdoor gantry crane will help protect its steel frame from corrosion and effectively extend the service life of the outdoor gantry crane.

Article by Bella ，who has been in the hoist and crane field since 2016. Bella provides overhead crane & gantry crane consultation services for clients who need a customized overhead travelling crane solution.Contact her to get free consultation.