3 -20 Ton Truss Crane Design Single Beam Gantry Crane with Hoist

Single beam gantry crane with truss crane design is designed for outdoor application with the features of high wind resistance & light weight. Contact us to get your single beam gantry crane design drawing now!

Truss Girder Single Beam Gantry Crane with Hoist Trolley

The truss girder design single beam gantry crane is designed for low-speed and light-duty material handling,, equipped CD/ MD electric wire rope hoists and other electric hoists as the lifting system with capacity from 3 to 32 tons.With single girder gantry crane design, the truss gantry crane makes the electric hoist trolley moving under along the main beam girder. With cantilevers, the single beam gantry crane can delivery the loads through the supporting legs to the crane edge, with convenience and high efficiency.Truss design single beam gantry crane is featured as simple structure, light dead weight, easy operation and installation.

Main specifications of truss girder single beam gantry crane

MH type truss girder single beam gantry crane are composed of metal structure, cart operating mechanism, electric device and trolley. The main specifications of truss girder single beam gantry crane are for your reference：

• Single Girder Gantry Crane with truss crane design
• Lifting capacity of single beam gantry crane: 3.2-20 tons
• Span of single beam gantry crane : 12-30m
• Lifting height of single beam gantry crane : 6-9m or customized
• Working class of single beam gantry crane: A3-A5
• Lifting mechanism of single beam gantry crane: CD1,MD1,HC
• Operation modes: ground handle, wireless remote control and driver's cab.
• Power supply: cable reel and high-altitude sliding line.

The MH type electric hoist single beam truss girder gantry crane is a general-purpose crane that is typically used for loading and unloading loads in open areas and warehouses. This single beam gantry crane has two modes of operation: ground and indoor. It can raise weights ranging from 3 to 20 tons and has a span of 12 to 30 meters. Temperatures range from -20°C to +40°C in the workplace.

Main structures of truss girder single beam gantry crane

Truss girder single beam gantry crane is small and medium-sized lifting equipment that runs on rails. It is mainly composed of mast (main beam, outrigger, lower beam, etc.), hoisting mechanism, operating mechanism and electronic control part, etc.The truss girder single beam gantry crane uses angle steel or I-beam welded structure, which has the advantages of low cost, light weight and good wind resistance. Usually, the truss girder single bean gantry crane adopts the electric wire rope hoist as the lifting system.

Main parts and components of gantry cranes

Truss girder single beam gantry crane is small and medium-sized lifting equipment that runs on rails. It is mainly composed of mast (main beam, outrigger, lower beam, etc.), hoisting mechanism, operating mechanism and electronic control part, etc.

Main Beam Girder of Single Beam Gantry Crane

Q235/Q345 carbon structural steel. Strong box type with standard deflection

Supporting Leg of Single Beam Gantry Crane

Engineer gantry crane will equipped one side rigid leg, the other side flexible leg, it is for reduce gnaw rail probability

Wheel Group for Single Beam Gantry Crane

Equipped with high quality forged wheel, strong crane wheel cover and famous brand motor

Open winch

With heavy capacity and high work duty, open winch was developed specifically for lifting that requires accuracy and smooth movement

Electric equipment

For crane and winch power supply, usually we equipped Schneider, ABB, Siemens brand, And inverter equipped Yaskawa brand

Crane Motor for Single Beam Gantry Crane

Crane traveling motor include YZR/YZP/Three in-one model, brand is Wuxi Hongda/Boneng/Guomao

Features of truss girder single beam gantry crane

MH type electric hoist truss girder single beam gantry crane is used in conjunction with CD, MD and other types of electric hoists. It is a small and medium-sized gantry crane that runs on rails embedded on the ground . The main girder and outriggers also can welded into a truss structure with steel bars or with box structure with steel plate which are designed according to your application conditions. The light weight of the frame structure is beneficial to reduce the impact of wind on the gantry crane.

• Simple and compact design
• The wind's surface is relatively small
• Light weight, high lifting capacity 4Stable performance
• Reduce the amount of maintenance required on a daily basis
• Reduce your plant and workshop construction costs.
• Ground control as well as remote control

Advantages of truss girder single beam gantry crane

The truss design single beam gantry crane adopts angle steel or I-beam welded structure, which has the advantages of low cost, light weight and good wind resistance. However, due to the many welding points and the defects of the truss itself, the truss beam girder also has the disadvantages of large deflection, low rigidity, and frequent inspection of the welding points. The truss girder single beam gantry crane is suitable for application with low safety requirements and small lifting weight.

• The best light crane, with low costs and weight
• Strong wind resistance
• Easy operation and installation
• Security with a high level of performance
• To be adaptable to a variety of operating situations and to give you with One-Stop Solutions

Application of single beam gantry crane

Truss design single beam gantry crane has a wide application and are used in various industrial occasions. Typically, truss design single beam gantry crane s are widely used for material handling in Concrete beam yard and Bridge Construction site.

For starters, single beam gantry cranes with truss designs are commonly employed in Concrete Beam Yard to handle concrete bridge beams, concrete plates, and other concrete items, among other things. A light and tiny tool or load handling electric hoist is installed on the main crane girder.

On the bridge construction site, an Engineered Truss design single beam gantry crane will be used to hoist concrete beams from ground transporters to bridge transporters, assisting the launcher crane in constructing the entire bridge.

Third, a single beam gantry crane with a truss design can be utilized to disassemble and reassemble launcher cranes.

Truss cranes can be utilized in a variety of diverse working environments, including the port, shipyard, railway line, material yards, and so on, thanks to their various designs and combinations. Furthermore, the truss design single beam gantry crane may be widely employed for material handling in a variety of industrial factories and plants, including Steel, Forest Products, Intermodal, Biomass/Pellet, and many others.

All in all, the truss girder single beam gantry cranes are widely used in various application because of the features and advantages of light-weighted, strong and stable performance and high wind resistance, etc. If you need a cut-to-tail truss girder single beam gantry crane solution, please feel free to contact us. Get free consultation on truss girder single beam gantry crane now.