20 Ton Gantry Crane for Precasting Yart- RTG Ganry Cranes


Content Quick Link

Your Trusted Gantry Crane Manufacturer & Supplier

20 Ton Rubber Tyred Gantry Crane for Precast Concrete Manufacturing
Single Girder RTG Gantry Crane for Outdoor Precasting Yard Material Handling

A customized 20-ton rubber tyred single girder gantry crane designed for outdoor concrete mold handling, with flexible yard movement and precise lifting for a precast concrete manufacturing facility.

Project Overview

This project involved the supply of a 20-ton single girder rubber tyred gantry crane for a precast concrete manufacturing plant in Lithuania. Designed for outdoor yard operations, the crane provides flexible lifting and transportation of large concrete molds between different production and storage areas.

Unlike conventional rail-mounted gantry cranes, this rubber-tyred gantry crane moves on pneumatic rubber tires, allowing it to travel across the yard without requiring a fixed runway rail system.

The single-girder configuration, European wire rope hoist, variable-speed travel functions, and remote control provide a practical lifting solution for handling heavy precast concrete molds.

Project Information

Details

Gantry Crane Type

20 Ton Gantry Crane , Single Girder, A Frame Gantry, Rubber Tyred Wheels Design

Hoisting System

Low headroom wire rope electric hoist

Crane Traveling

Motoried rubber tyred wheel travelling

Lifting Capacity

20 ton

Span

7.5 m

Lifting Height

10 m

Hoist Type

European Wire Rope Hoist

Lifting Speed

0.7 / 4.0 m/min

Trolley Travel Speed

1.0–10 m/min

Crane Travel Speed

1.0–10 m/min

Power Supply

380V / 50Hz / 3-phase

Control Method

Remote Control

Protection Class

IP55

Project Location

Lithuania

Industry

Precast Concrete Manufacturing

Crane Manufacturer and Supplier

Yuantai Cranes

Project Number

26YT45MIA

Project Background: Heavy Mold Handling in an Outdoor Precast Concrete Yard

The customer in Lithuania specializes in precast concrete manufacturing. During production, large concrete molds must be lifted, transferred, and accurately positioned at different stages of the manufacturing process.

Some molds weigh approximately 16–18 tons, making a 20-ton rated lifting capacity suitable for the customer's stated handling requirements, subject to verification of the complete lifting arrangement and any additional lifting attachments.

The customer needed lifting equipment capable of handling heavy molds while providing flexible movement throughout the outdoor production area.

The main project requirements were:

  • Lifting capacity: Handle concrete molds weighing up to approximately 16–18 tons.
  • Frequent operation: Support repeated lifting and transportation during daily production.
  • Stable lifting: Minimize load swinging during mold handling and positioning.
  • Accurate positioning: Allow operators to control lifting, trolley travel, and crane movement smoothly.
  • Outdoor mobility: Move between different working positions without depending on a fixed runway rail system.
  • Environmental protection: Provide suitable electrical protection for outdoor industrial operation.

Based on these requirements, Yuantai Crane supplied a customized 20-ton single girder rubber tyred gantry crane.

Why Choose a 20 Ton Single Girder Rubber Tyred Gantry Crane?

For precast concrete manufacturers, lifting equipment must do more than lift molds vertically. It also needs to move heavy components between workstations and position them accurately. A rubber tyred gantry crane provides mobile lifting capability for outdoor production and storage yards without requiring a conventional fixed runway system.

Rubber-Tyred Mobility for Outdoor Yard Operations

Unlike a conventional gantry crane that travels on fixed ground rails, a rubber tyred gantry crane moves on rubber tires along designated yard paths. This makes it suitable for outdoor precast concrete facilities where molds and concrete components need to be transferred between production, handling, and storage areas.

Its mobile design offers several practical advantages:

  • Flexible movement between designated yard workstations.
  • No requirement for a conventional elevated runway beam system.
  • Greater flexibility when arranging production and storage areas.
  • Practical handling of precast molds in open production yards.

Important site requirement: The yard surface must be sufficiently level and strong to support the crane under operating conditions. Ground bearing capacity and maximum wheel loads should be checked during site planning, including the load distribution when the crane is lifting and traveling.rubber tyred gantry crane 's travelling wheels

Single Girder Configuration for a 20 Ton Lifting Application

The crane features a single main girder with a European-style electric wire rope hoist traveling along the bridge. This provides a compact lifting arrangement for the customer's outdoor precast concrete handling requirements.

For this Lithuania project, the crane was designed with a 20-ton rated lifting capacity and a 7.5 m span, based on the required load handling and available working area.

The main equipment configuration includes:

  • Single main girder.
  • European-style electric wire rope hoist.
  • Hoist trolley traveling mechanism.
  • Rubber-tyred crane traveling system.
  • Electrical control system and remote operating system.

The single-girder arrangement should be verified against the actual lifting duty and structural requirements. Girder dimensions, deflection, wheel loads, overall stability, and supporting structure must be checked according to the applicable design standards and operating conditions.

European Wire Rope Hoist with Two-Speed Lifting

The crane is equipped with a European-style electric wire rope hoist featuring two lifting speeds:

  • Fast lifting speed: 4.0 m/min.
  • Slow lifting speed: 0.7 m/min.

This two-speed arrangement allows operators to select a suitable lifting speed for different stages of material handling.

The faster speed supports routine vertical transportation, while the slower speed helps operators lower heavy concrete molds carefully and align them with production supports. This is particularly useful when handling large or high-value molds that require controlled positioning. electric variable speed low headroom hoist

Variable-Speed Trolley and Crane Travel

Both the hoist trolley and the rubber-tyred crane traveling mechanisms operate at a variable speed range of 1.0–10 m/min.

Variable-speed travel gives operators better control over horizontal movement. The speed can be adjusted according to the load, travel distance, and positioning requirements.

For precast concrete mold handling, slower travel is useful when approaching a mold support, moving near other production equipment, or positioning a heavy mold at a specific workstation. Faster travel can be used when the crane needs to cover longer distances across the yard.

IP55 Protection for Outdoor Industrial Conditions

The crane's electrical equipment is specified with an IP55 protection rating. This means the enclosures are protected against harmful dust deposits and water jets from any direction under the conditions defined by the IP rating standard.

For outdoor operation in Lithuania, IP55 is one part of the electrical protection requirements. Buyers should also check the following conditions before confirming the crane configuration:

  • Operating temperature: Confirm the minimum and maximum ambient temperatures, especially for winter operation.
  • Moisture protection: Check whether additional protection is required for condensation, rain, or prolonged outdoor exposure.
  • Corrosion protection: Select suitable surface preparation and coating systems for the local environment.
  • Low-temperature components: Verify that lubricants, cables, seals, brakes, and electrical components are suitable for the specified winter temperatures.

Selection note: IP55 does not by itself confirm that a crane is suitable for every outdoor climate. The complete electrical and mechanical configuration should be selected according to the actual site conditions and required operating temperature range.

Key Technical Features and Advantages

 rubber tyred gantry crane 20 ton, tailored solution single girder gantry crane with a frame gantry and rubber tyred wheel travelling  rubber tyred gantry crane 20 ton, tailored solution single girder gantry crane with a frame gantry and rubber tyred wheel travelling 

FeatureProject ConfigurationApplication Benefit
Lifting Capacity20 TonHandles concrete molds weighing approximately 16–18 tons
Single Girder Design7.5 m SpanCompact structural arrangement for the specified working area
Lifting Height10 mProvides vertical clearance for mold lifting and transfer
European Wire Rope HoistTwo-speed liftingSupports efficient lifting and controlled positioning
Lifting Speed0.7 / 4.0 m/minSlow positioning and faster general lifting
Trolley Travel1.0–10 m/minAdjustable horizontal movement along the girder
Crane Travel1.0–10 m/minFlexible movement across the outdoor yard
Rubber TiresMobile travel systemNo conventional fixed runway rails required
Radio Remote ControlWireless operationAllows operators to control crane movements from a suitable operating position
IP55Electrical protectionSuitable protection level for specified industrial conditions

How This Crane Supports Precast Concrete Production

The 20-ton rubber tyred gantry crane can support several material-handling operations in a precast concrete production yard.

Concrete mold lifting and transfer: The crane lifts heavy molds from designated storage or preparation positions and transfers them to the required production area.

Mold installation and positioning: The two-speed hoisting system allows operators to use the slower lifting speed when lowering and aligning molds.

Movement between production stations: The rubber-tyred traveling system provides mobility across designated yard routes, supporting material handling between different working positions.

Outdoor mold storage and handling : The crane can also assist with moving molds between outdoor storage locations and production areas, subject to the available ground conditions and approved travel routes.

Importing a 20 Ton Rubber Tyred Gantry Crane from China to Lithuania

For Lithuanian precast concrete manufacturers considering the purchase of a 20-ton rubber tyred gantry crane from China, equipment selection is only one part of the procurement process. Buyers should also consider technical documentation, customs clearance, transport arrangements, and EU compliance requirements.

Confirm Technical Specifications Before Ordering

Before requesting a quotation, buyers should prepare the following information:

  • Rated lifting capacity and maximum mold weight.
  • Crane span and required lifting height.
  • Outdoor working area and ground conditions.
  • Travel route, turning requirements, and available clearance.
  • Required lifting and traveling speeds.
  • Power supply and control preferences.
  • Operating temperature and environmental conditions.
  • Expected working frequency and duty classification.

For a 20-ton rubber tyred gantry crane, the ground-bearing capacity and wheel loads are particularly important. The supplier should provide wheel-load data so that the customer can check the yard pavement and foundation conditions.

Confirm CE and EU Machinery Compliance

Lithuania is an EU member state, so imported industrial lifting equipment must meet the applicable EU product legislation.

For a crane placed on the EU market in 2026, buyers should pay particular attention to the Machinery Directive 2006/42/EC, which remains applicable until the Machinery Regulation (EU) 2023/1230 becomes applicable on 20 January 2027.

Before shipment, clarify:

  • CE conformity assessment and marking.
  • EU Declaration of Conformity.
  • Applicable harmonized standards.
  • Structural and mechanical design documentation.
  • Electrical diagrams and control documentation.
  • Operating and maintenance manuals.
  • Load testing and inspection records.
  • Risk assessment and safety-related documentation.

CE marking should relate to the complete supplied crane and its applicable conformity requirements, not simply to individual motors or electrical components.

Arrange Shipping from China to Lithuania

A 20-ton rubber tyred gantry crane is a large industrial machine. Its transport dimensions, overall weight, tire configuration, and degree of disassembly will determine the shipping method.

Typical shipping arrangements include:

  • Container shipping: Suitable when the crane can be dismantled into transportable components that fit the selected containers.
  • Flat rack or open-top container: May be considered for oversized components that cannot be loaded into standard containers.
  • Breakbulk or other project cargo: May be required for large assembled structures or components exceeding container dimensions.

The supplier should prepare a packing list, component dimensions, gross weight, loading plan, and shipping drawings before the buyer confirms the freight arrangement.

Sea freight from a Chinese port to Lithuania may involve transshipment and delivery through the Port of Klaipėda or another suitable European logistics route, followed by inland transportation to the customer's facility.

The final route depends on the carrier, cargo dimensions, port arrangements, and delivery location.

Customs Clearance and Import VAT in Lithuania

For commercial imports from China into Lithuania, the buyer or appointed customs representative should arrange the necessary customs declaration and import documentation.

Common documents include:

  • Commercial Invoice.
  • Packing List.
  • Bill of Lading.
  • Customs declaration.
  • Certificate of Origin, when required or requested.
  • Technical product documentation.
  • Insurance and freight documents, where applicable.

The applicable customs duty depends on the correct TARIC classification of the complete crane and its components. Buyers should confirm the tariff classification and any applicable trade measures before shipment rather than assuming a fixed import duty rate.

Lithuania's standard import VAT rate is 21%, subject to the applicable tax rules and any relevant relief or special arrangement.

The buyer should also confirm its EORI registration and whether it will handle customs clearance directly or appoint a customs broker.

Plan Inland Delivery and Installation

After customs clearance, the crane components must be transported from the arrival port or logistics terminal to the precast concrete plant.

Before delivery, the customer should prepare:

  • An accessible unloading area.
  • A suitable mobile crane or other unloading equipment, if required.
  • A level and load-bearing installation area.
  • Electrical power connections.
  • Designated crane travel routes.
  • An installation and commissioning plan.

For a rubber-tyred gantry crane, ground conditions are especially important because the tires transfer the crane loads directly to the yard surface.

Before commissioning, the complete crane should undergo installation checks, functional testing, and the required load testing and safety verification.

Why Choose Yuantai Crane for a 20 Ton Rubber Tyred Gantry Crane?

Yuantai Crane provides customized overhead and gantry crane systems for industrial material-handling applications.

For precast concrete manufacturers, crane selection needs to consider the actual mold dimensions, lifting attachments, working area, ground conditions, and production workflow.

Yuantai Crane can assist buyers with:

  • Customized 20-ton single girder and double girder gantry crane solutions.
  • Rubber-tyred and rail-mounted gantry crane configurations.
  • European wire rope hoist selection.
  • Lifting and traveling speed configuration.
  • Electrical systems and remote control.
  • Technical drawings and load information.
  • Manufacturing inspection and factory testing.
  • Export packing and shipping documentation.

Whether you need a rubber tyred gantry crane for concrete mold handling, precast component transportation, or outdoor material storage, the crane should be designed around the actual site and lifting requirements.

Frequently Asked Questions

Find answers to common questions about the 20-ton single girder rubber tyred gantry crane, its outdoor precast concrete applications, technical configuration, and import requirements for Lithuania.

What is a 20 ton single girder rubber tyred gantry crane used for?

A 20-ton single girder rubber tyred gantry crane is used for lifting and transferring heavy materials in outdoor industrial areas. In precast concrete manufacturing, typical applications include concrete mold handling, mold transportation, and precast component storage operations.

What is the advantage of a rubber tyred gantry crane over a rail-mounted gantry crane?

A rubber tyred gantry crane travels on tires rather than fixed rails. It provides greater flexibility for movement between designated working areas and does not require a conventional fixed rail runway. However, the yard surface must be suitable for the crane's wheel loads and travel requirements.

Is a 20-ton crane suitable for lifting an 18-ton concrete mold?

A 20-ton rated crane may be suitable for an 18-ton mold, provided that the complete lifted load, including lifting beams, slings, and other attachments, remains within the permitted rated capacity. Dynamic effects, load distribution, and operating conditions must also be considered.

What is the advantage of a European wire rope hoist?

A European wire rope hoist offers a compact lifting arrangement and can be configured with suitable lifting speeds, trolley travel, braking systems, and control functions. In this project, the two lifting speeds of 0.7 and 4.0 m/min support both general lifting and slower mold positioning.

Can a rubber tyred gantry crane operate outdoors in Lithuania?

Yes, a rubber tyred gantry crane can be designed for outdoor industrial applications in Lithuania. The buyer should confirm the specified operating temperature range, electrical protection, corrosion protection, tire performance, and winter operating requirements.

Can I import a 20-ton gantry crane directly from China to Lithuania?

Yes. Lithuanian manufacturers can purchase industrial cranes from Chinese manufacturers and import them through the applicable EU customs procedures. Buyers should confirm the crane's CE conformity, EU Declaration of Conformity, customs classification, import VAT, shipping arrangements, and installation requirements before placing an order.

20 Ton Rubber Tyred Gantry Crane FAT Factory Testing Before Delivery

20 Ton RTG Crane Factory Testing | No-Load & Load Test Before Delivery

Request a Customized 20 Ton Rubber Tyred Gantry Crane

Looking for a 20-ton rubber tyred gantry crane for your precast concrete production yard?

Send Yuantai Crane your required lifting capacity, span, lifting height, mold weight, yard dimensions, ground conditions, and power supply. Our engineering team can evaluate the working conditions and recommend a suitable single girder or double girder gantry crane configuration.

Yuantai Crane – China Gantry Crane Manufacturer

Contact our engineering team for technical consultation, customized crane design, and an export quotation for your project in Lithuania.

Article by Bella ,who has been in the hoist and crane field since 2016. Bella provides overhead crane & gantry crane consultation services for clients who need a customized overhead travelling crane solution.Contact her to get free consultation.


Yuantai Cranes

Overhead Crane Manufacturer with CE, ISO, SGS, CNEX Certificates.

  • Main Specifications - Capacity: 0.5–550 tons | Span: up to 40m | Speed: 0.8–12 m/min | Duty: A3–A7 | Power: 380–690V, 50/60Hz | Control: pendant/remote/cabin
  • Full engineering: FEA/PLC/VFD + in-house build + global delivery + on-site support, for workshops, factories, EPC contractors, industrial projects, etc.
  • Support: design, manufacturing, testing, service – end-to-end, customized lifting solutions worldwide.

How to Get an Accurate Crane Price for Your Application?
Tips: Copy the spec list, fill in your details, and paste it into the form on the right/ down-below for a quick price.

  • Crane type:_____ . (e.g., overhead crane, gantry crane, jib crane)
  • Max weight to lift:_____ tons. (e.g., 2t, 5t, 10t, 20t, 50t)
  • Lifting height:_____ m. (How high does the hook need to reach?
  • Workshop width (span):_____ m . (Distance between the two crane rails)
  • Travel distance:_____ m . (How long does the crane need to move along the runway?)
  • Control type:_____. (Pendant / remote / cabin Control)
  • Power supply:_____. (Local voltage & frequency – e.g., 380V, 50Hz, 3-phase)
  • What will it be used for?_____ (e.g., steel fabrication, concrete products, mold handling, general manufacturing, etc.)
  • Any special requirements?_____ (e.g., extreme temperature, dusty or explosive environment, special paint color, etc.)

Just leave a message via the contact form and our hoist and crane engineer will contact you with in 24working hours.

Get Your Custom Quote–Quick & Easy

Fill in what you know. Skip what you don't – we'll help.Any question will be reply with 24 working hours