2 Ton Low Headroom Free Standing Bridge Crane with Electric Chain Hoist

2 Ton Low Headroom Free Standing Bridge Crane Video

This video shows a 2 ton low headroom free standing bridge crane running on an independent runway system.

The crane uses an electric chain hoist for lifting. The bridge travels along the freestanding runway, supported by its own steel columns.The low headroom arrangement is intended for workshops where space above the lifting area is limited. The crane can be installed without using the existing building roof structure to carry the runway.

The low headroom freestanding bridge system is suitable for lifting machinery, steel parts, tools, production materials, and other loads up to 2 tons.

Crane Shown in the Video

Here is the compact, key-data-focused rewrite for your 2-ton freestanding overhead crane, with the electric chain hoist and low headroom configuration retained, and project-dependent items clearly noted without extra fluff.

2 Ton Freestanding Overhead Crane – Technical Specifications

Key Configuration Notes:

• Crane type matches the video: freestanding, single-girder, electric chain hoist with low headroom for optimal hook height.
• Structural steel: Q235B/Q345B; deflection ≤ L/800 per GB/T 3811.
• Safety: Overload limiter, limit switches, emergency stop, phase failure relay.
• Surface: Shot-blasted (Sa2.5) + epoxy primer + polyurethane topcoat.
• Final span, height, runway length, and duty class are customized per site requirements.

What Is a Low Headroom Bridge Crane?

In a low headroom crane, the space taken by the hoist above the load is kept as small as practical.

This matters when the workshop has a low roof or when beams, pipes, lights, ventilation ducts, or other equipment are already installed above the lifting area.

For this reason, the buyer should check more than the lifting capacity.

The important dimensions are:

• Workshop height
• Lowest obstruction
• Runway elevation
• Hoist headroom
• Required hook height
• Load height
• Crane span
• Runway length

For this type of project, required hook height is particularly important. It tells the crane manufacturer how high the hook needs to reach within the available building space.

Why Use a Freestanding Runway?

The runway in this crane is supported by its own columns.

It does not have to be suspended from the workshop roof or connected to existing building columns.

This arrangement is often used in existing workshops where:

• There is no overhead crane runway.
• The building was not designed for crane loads.
• The customer does not want to modify the roof structure.
• A new lifting station is being added.
• The crane needs to cover a specific production area.
• The runway needs to follow an existing workshop layout.

The columns and foundations still need to be checked for the loads from the crane and runway.

Why Use an Electric Chain Hoist?

For a 2 ton crane, an electric chain hoist can provide a compact lifting unit.

It is commonly considered for workshop jobs such as:

• Machine maintenance
• Motor and gearbox handling
• Tool handling
• Mold handling
• Steel component lifting
• Equipment assembly
• Pump maintenance
• Production material handling

The hoist should be selected from the required lifting height, lifting speed, working frequency, headroom, and load conditions—not capacity alone.

Technical Points Buyers Should Check

Before ordering a 2 ton low headroom bridge crane, check these dimensions first:

A workshop drawing is useful, especially when the available headroom is tight.

Example: 2 Ton Low Headroom Crane

For customers who are still preparing the crane specification, this is a useful starting point:

These are example figures, not fixed specifications for every 2 ton crane.

What Should I Send for a Quote?

If you want a price for a similar crane, send:

Capacity: 2 tons
Span: ___ m
Lifting Height: ___ m
Runway Length: ___ m

For a low headroom project, also send:

Workshop Height: ___ m
Lowest Obstruction: ___ m
Required Hook Height: ___ m

If there is a workshop drawing, include it.

These dimensions give the manufacturer enough information to start checking the crane layout and hoist arrangement.

FAQs

1. What crane is shown in this video?

The video shows a 2 ton low headroom free standing bridge crane with an electric chain hoist and an independent freestanding runway.

2. Where is this 2 ton crane used?

It is intended for indoor lifting in workshops, factories, assembly areas, maintenance stations, and production areas. Typical loads include machinery, steel parts, tools, motors, pumps, and production materials.

3. Why is the low headroom design important?

It helps when there is limited space between the workshop roof and the required hook position. The hoist and crane dimensions need to be checked against the actual building height.

4. Does the runway need to be connected to the building?

No. The runway is supported by independent steel columns. The foundation and floor conditions still need to be checked before installation.

5. Can this crane be installed in an existing workshop?

Yes. The runway can be arranged around the existing workshop layout. Column positions, span, runway length, hook height, and clearance need to be checked.

6. What information is needed to buy this crane?

Start with the capacity, span, lifting height, and runway length. For low headroom applications, also provide the workshop height, lowest obstruction, and required hook height.

2 Ton Low Headroom Free Standing Bridge Crane Manufacturer

Yuantai Crane supplies free standing bridge crane systems for indoor material handling.

For a 2 ton low headroom crane, send the basic dimensions and workshop layout. The crane configuration can then be checked against the available headroom, required hook height, runway travel, and working conditions.