OEM Crane Orders from China: Price, MOQ & Lead Time


Content Quick Link

OEM Crane Orders from China: Pricing, MOQ, Lead Time and Shipping

Buying overhead crane components or complete crane systems from China can make good commercial sense for crane distributors, importers, wholesalers, and local manufacturers. Chinese suppliers offer a wide range of products, from hoists, end carriages, and travel mechanisms to complete overhead cranes and gantry crane systems.

But once you start requesting quotations, the factory price is only one part of the calculation. You also need to think about engineering costs, customization, minimum order quantity (MOQ), production lead time, export packaging, international freight, customs duties, and after-sales support.

A distributor sourcing standard wire rope hoists in bulk will have a very different purchasing process from a local crane manufacturer ordering customized end carriages or a complete overhead crane kit. The product, order quantity, technical requirements, and delivery destination all affect the final cost.

This guide walks through how OEM crane pricing works in China, what to expect from MOQ and production schedules, and how to calculate the total landed cost of importing crane components or complete crane systems. It also covers the practical details that tend to come up in real OEM conversations — duty classes, interface drawings, container loading, spare parts allowances, and the paperwork that keeps a project on schedule.

What Affects the Price of OEM Cranes from China?

There is no single price for an OEM crane order. Two cranes with the same lifting capacity can come back with very different quotations because their spans, lifting heights, duty classifications, operating environments, electrical configurations, and supplied components may not be the same.

The same applies to crane components. A standard end carriage and a custom-designed end carriage may look similar, but differences in wheel diameter, track gauge, motor arrangement, connection dimensions, and load requirements can all move the manufacturing cost.

When you're evaluating an OEM crane quotation from China, pay attention to these factors:

Price FactorWhat It IncludesHow It Affects the Cost

Product type

Hoists, end carriages, trolleys, crane kits, complete overhead cranes, or gantry cranes

Different products require different materials, components, manufacturing processes, and testing procedures.

Lifting capacity

Rated load, lifting mechanism, supporting structure, and drive system

Higher capacity usually requires stronger structures and larger or more powerful components.

Span and dimensions

Crane span, wheelbase, track gauge, lifting height, and overall dimensions

Non-standard dimensions may require additional engineering and customized fabrication.

Duty classification

Working frequency, load spectrum, operating hours, and duty class

Higher-duty applications may require more robust motors, brakes, gearboxes, and structural designs.

Components and brands

Motors, gearboxes, brakes, electrical equipment, bearings, and control systems

Component specifications and selected brands can make a noticeable difference to the quotation.

Customization

Special dimensions, voltage, frequency, control methods, protection ratings, and environmental requirements

Custom engineering, non-standard parts, and additional manufacturing work can increase the initial cost.

Order quantity

Number of units, sets, or complete systems

Larger orders may reduce the unit cost by spreading setup, purchasing, and production costs across more products.

Inspection and testing

Functional testing, load testing where applicable, inspection reports, and third-party inspection

Additional inspection requirements may add cost and time before shipment.

Packaging and shipping

Export packaging, container loading, inland transport, and international freight

Product dimensions, weight, shipping method, and destination affect the final delivery cost.

One point worth checking: make sure the quotation is based on the same technical specifications as the other suppliers you're comparing. A lower price may simply mean that certain components, electrical equipment, or inspection requirements have been left out.

Duty classification and its practical cost impact

Duty classification is one of the most frequently underestimated cost drivers. Under ISO 4301-1 and FEM 9.511, crane duty is classified by the number of load cycles and the load spectrum over the design life. Here's what the commonly used classes mean for component selection and price.

Duty Class (ISO 4301-1)FEM 9.511 GroupTypical ApplicationDesign Load CyclesPractical Cost Impact

A1–A3

M1–M3

Light workshop use, maintenance cranes, occasional lifting

Up to 2×10⁴ cycles

Baseline. Standard motors, commercial gearboxes, and standard brakes are usually acceptable.

A4

M4

General workshop and warehouse cranes

Up to 1×10⁵ cycles

Moderate increase. Requires verified brake ratings and heavier gearbox sizing.

A5

M5

Production workshops, machine shops, assembly lines

Up to 5×10⁵ cycles

Noticeable increase. Heavy-duty motors, inverter-duty windings, and reinforced structural detailing may be needed.

A6

M6

Steel yards, foundries, continuous production

Up to 1×10⁶ cycles

Higher cost. Requires heavy-duty brake systems, larger gearbox service factors, and stricter welding inspection.

A7–A8

M7–M8

Steel mills, container handling, severe duty

Up to 4×10⁶ cycles

Significant cost increase. Premium components, higher safety factors, and extensive testing are standard.

For a first-time importer, the most common mistake is to specify capacity and span but leave out the duty class. A supplier quoting A3-grade machinery for an A5 application may look cheaper, but the equipment will wear out faster and may not meet local regulatory requirements.

How component brand selection changes the quotation

The brand of motors, gearboxes, brakes, inverters, and electrical components can swing an OEM crane quotation by 15–40% for the same mechanical scope. A typical hierarchy in Chinese crane manufacturing looks like this:

Component CategoryEconomy OptionMainstream OptionPremium OptionTypical Price Impact

Hoist motor

Domestic standard motor

Domestic inverter-duty motor

Siemens, ABB, SEW, or equivalent

+10% to +35%

Gearbox

Domestic standard reducer

Domestic hardened-gear reducer

SEW, Nord, or equivalent

+15% to +40%

Brake

Domestic electromagnetic brake

Domestic heavy-duty brake

SIME, Pintsch Bubenzer, or equivalent

+8% to +25%

Inverter / VFD

Domestic basic VFD

Domestic crane-duty VFD

Schneider, ABB, Danfoss, Yaskawa

+5% to +20%

Electrical components

Domestic contactors and relays

Mixed domestic and international

Schneider, Siemens, ABB

+5% to +15%

When comparing quotations, always ask for a component brand list (BOM-level). A quotation without a brand list isn't directly comparable to one that specifies brands, because the "cheaper" offer may use components with shorter service life or limited spare-parts availability in your market.

How Is an OEM Crane Price Calculated?

An OEM crane quotation generally consists of several cost categories. Understanding these items makes it easier to compare suppliers and work out where a price difference is coming from.

Materials and structural fabrication

For complete overhead cranes, gantry cranes, and customized crane kits, structural materials and fabrication are important cost items.

The quotation may include:

  • Main girders, end carriages, and supporting steel structures.
  • Steel plates, profiles, and other structural materials.
  • Cutting, welding, machining, and structural assembly.
  • Surface preparation, painting, and corrosion protection.
  • Dimensional inspection and fabrication checks.

Steel grade, plate thickness, structural design, welding requirements, and paint specifications all affect the cost. For outdoor cranes or equipment installed in coastal and corrosive environments, buyers may also need to specify additional surface protection.

Material and fabrication benchmarks. For reference, a typical Q235B or Q355B main girder for a 10-ton, 18-meter span single-girder crane uses roughly 4–6 mm web plate and 8–12 mm flange plate, with a finished girder weight of about 1.2–1.8 tons. A double-girder 20-ton, 18-meter span crane typically uses box girders with 6–8 mm web plate and 12–16 mm flange plate, with each girder weighing around 3.5–5 tons. These figures vary with duty class and design standards, but they help buyers sanity-check quotations and freight estimates.

Welding and inspection standards. Common specifications referenced in Chinese OEM quotations include:

ItemCommon SpecificationWhat It Means in Practice

Structural welding standard

GB/T 985.1, GB/T 986, or ISO 5817

Defines weld quality levels (B, C, D). Level B requires stricter inspection and adds cost.

Weld inspection

Visual inspection (VT), ultrasonic testing (UT), magnetic particle testing (MT)

UT on critical welds (girder-to-end-carriage connections) is commonly requested for A5 and above.

Surface preparation

Sa2.5 shot blasting per ISO 8501-1

Standard for export orders. Sa3 is available at extra cost for corrosive environments.

Paint system

Primer + intermediate + topcoat, 120–180 μm total DFT

Coastal or outdoor cranes typically require 200–240 μm and an epoxy or polyurethane system.

Mechanical components

The mechanical configuration depends on the crane type and its working conditions. A typical overhead crane may include:

  • Wire rope hoist or open winch.
  • Hoisting trolley and cross-travel mechanism.
  • Long-travel drive units and end carriages.
  • Wheels, shafts, bearings, and gearboxes.
  • Brakes, couplings, and transmission components.

For crane component wholesalers and local crane manufacturers, it's important to check whether the quotation includes complete assemblies or individual parts. An end carriage quotation, for example, may or may not include travel motors, wheels, buffers, and electrical accessories.

Hoist duty and speed reference data. The table below gives typical hoisting and travel speed ranges by duty class for wire rope hoists, which is handy when specifying or comparing hoist quotations.

Duty ClassTypical Hoisting Speed (m/min)Typical Cross-Travel Speed (m/min)Typical Long-Travel Speed (m/min)Typical Hoist Motor Sizing (10 t)

A3

5–8

15–20

20–30

7.5–11 kW

A4

6–10

15–25

25–40

11–15 kW

A5

7–12

20–30

30–50

15–18.5 kW

A6

8–15

20–35

40–60

18.5–22 kW

These figures are indicative and depend on rope reeving (4/1, 6/1, or 8/1), motor type, and control method. If a supplier quotes unusually high speeds for a given duty class, check the motor thermal rating and brake sizing — sustained high speed at high duty can overheat standard motors.

Wire rope specifications. The rope itself is a frequent source of price and quality variation. Common configurations for overhead cranes are:

  • 6×36 IWRC, 1770 MPa, galvanized or bright: general-purpose hoisting rope, the most common OEM specification.
  • 6×19 FC or IWRC: used for smaller hoists and static or low-flex applications.
  • 8×19 or 8×36: used where rotation resistance matters, such as single-line lifting.
  • Rope safety factor: typically 5:1 or higher per ISO 4308 / GB/T 3811, depending on duty class and local regulations.

Ask the supplier to state rope diameter, construction, tensile grade, and safety factor in the quotation. A quotation that lists only "steel wire rope" without these details is hard to compare.

Electrical systems and control equipment

Electrical specifications can also create a considerable price difference between OEM crane suppliers.

Check whether the quotation includes:

  • Control panels and electrical cabinets.
  • Variable frequency drives (VFDs), if required.
  • Power supply systems, such as conductor rails or cable festoon systems.
  • Pendant control, radio remote control, or cabin control.
  • Motors, limit switches, sensors, and protection devices.
  • Required voltage, frequency, and phase configuration.

For overseas orders, don't just write "380V" or "400V" in the inquiry. Confirm the full electrical supply, such as 400V, 50Hz, 3-phase, or 480V, 60Hz, 3-phase. Also confirm the required control voltage and electrical standards.

Control voltage and protection reference. The table below summarizes common configurations that should be specified explicitly in the inquiry.

ParameterCommon OptionsNotes for OEM Orders

Main power supply

380V/50Hz, 400V/50Hz, 415V/50Hz, 440V/60Hz, 480V/60Hz, 3-phase

State voltage, frequency, and phase together. 60Hz systems require different motor windings and VFD parameter sets.

Control voltage

24V DC, 48V AC, 110V AC, 220V AC

24V DC is common for safety circuits and radio remote systems. 110V AC is common in North American projects.

Ingress protection

IP54, IP55, IP65

IP55 is typical for indoor industrial use. IP65 is recommended for dusty, washdown, or outdoor environments.

Insulation class

F, H

Class F is standard. Class H may be specified for high-temperature environments such as foundries.

VFD duty

Standard VFD vs. crane-duty VFD

Crane-duty VFDs include brake chopper, hoist-specific software, and higher overload ratings (typically 150% for 60 s).

Electrical standard

IEC, GB, UL/CSA, local code

UL/CSA components add cost and lead time. Confirm whether the destination requires NRTL-listed panels.

Conductor rail and festoon system sizing. Power supply to the crane is sometimes left out of the kit scope. For reference:

  • Conductor rail: typically sized by current draw, with common ratings of 50 A, 80 A, 100 A, 160 A, and 250 A. The rail length equals runway length plus allowances.
  • Cable festoon: sized by cable count, cable diameter, and travel length. Festoon systems are common for spans under 30 m; conductor rails are preferred for long runways and high-duty cycles.
  • Current calculation: sum the rated currents of all motors, apply a diversity factor (often 0.6–0.8 for cranes), and add 20–25% margin for future loads and inrush.

Engineering and customization costs

Standard products are generally easier to quote than customized crane systems. If you need special dimensions, non-standard connections, a different motor arrangement, or a particular control configuration, the supplier may need to carry out additional engineering work.

Depending on the project, the quotation may include:

  • Technical drawing preparation and design review.
  • Customized structural or mechanical design.
  • Electrical schematic development.
  • Special tooling, fixtures, or machining arrangements.
  • Prototype or sample production.

Ask the supplier to separate one-time engineering or tooling charges from the recurring unit price. This matters when you plan to place repeat OEM orders. You don't want to compare a first-order quotation with a repeat-order quotation without understanding the difference.

Typical engineering and tooling charges. These vary widely by supplier and complexity, but the ranges below are useful for budgeting:

Engineering ItemTypical One-Time Cost Range (USD)Notes

Custom end carriage design (per size)

300–1,500

Includes drawings, dimension checks, and interface confirmation. Higher if structural calculations are required.

Custom crane kit drawing package

500–2,500

Depends on the number of custom interfaces and whether electrical schematics are included.

New tooling or fixtures

500–5,000+

Applied when non-standard machining or welding fixtures are needed.

Prototype / first article

Charged at unit price + 20–100%

Often partially credited against the first production order.

Third-party design verification

1,000–5,000+

Required in some markets for structural or electrical compliance.

Always confirm whether engineering charges are one-time, refundable, or amortized into the unit price at a certain order quantity.

Inspection, testing, and documentation

Testing requirements should be confirmed before production starts. Depending on the product and contract, the quotation may include functional testing, dimensional inspection, electrical checks, load testing, and a factory acceptance test (FAT).

If you require third-party inspection, such as SGS, TÜV, Bureau Veritas, or Intertek, confirm whether the inspection fee is included or quoted separately. The inspection scope should also be agreed in advance.

Load test reference values. Static and dynamic load tests are commonly specified as follows:

Test TypeTypical LoadDuration / RequirementCommon Standard Reference

Static load test

125% of rated capacity

Lift and hold; verify no permanent deformation or brake slip

ISO 4310, GB/T 5905

Dynamic load test

110% of rated capacity

Operate all motions through full travel; verify brakes and limit switches

ISO 4310, GB/T 5905

Brake test (hoist)

Rated load

Verify holding and controlled lowering; check brake temperature rise

ISO 4301, FEM 9.511

Limit switch test

No load

Verify upper/lower hoist limits, travel limits, and emergency stop

IEC 60204-32

Insulation resistance

500 V DC megger

Typically ≥1 MΩ for main circuits

IEC 60204-32

For FAT documentation, request at minimum: a test report with measured values, calibration certificates for test weights and instruments, electrical inspection records, and photographs or video of the test.

Should You Buy Individual Crane Components, Crane Kits, or Complete Cranes?

When sourcing from a Chinese OEM crane manufacturer, you don't always need to purchase a complete crane. The right purchasing model depends on your manufacturing capability, local installation resources, customer requirements, and order volume.

Most overseas buyers can consider three options:

Purchasing ModelTypical Supply ScopeSuitable BuyersMain Considerations

Individual crane components

Hoists, end carriages, wheels, motors, brakes, trolleys, and electrical components

Crane parts wholesalers, maintenance companies, and local crane manufacturers

Buyers need to check interfaces, dimensions, specifications, and compatibility with their existing systems.

Crane kits

Complete mechanical and electrical assemblies for a single-girder or double-girder crane, with the scope agreed in the quotation

Crane manufacturers, distributors, and engineering companies

The local buyer can manufacture or source the bridge structure and complete installation locally, depending on the kit scope.

Complete crane systems

Complete overhead cranes, gantry cranes, jib cranes, or other lifting equipment

Industrial end users, EPC contractors, project suppliers, and crane distributors

Confirm the supply boundary, installation responsibilities, runway requirements, electrical connections, and commissioning scope.

For a local crane manufacturer, buying a complete crane kit can be a practical option. You can source the hoisting mechanism, travel units, end carriages, and electrical systems from China while keeping structural fabrication, installation, and customer service under your own control.

For a spare parts wholesaler, individual components may be a better fit. You can build inventory around commonly used hoists, motors, wheels, brakes, and electrical parts without committing to complete crane systems.

Before requesting a quotation, define exactly what you expect the Chinese manufacturer to supply. A clear supply boundary helps prevent missing components and unexpected costs later.

Interface data you must exchange for component and kit orders

When buying components or kits rather than complete cranes, interface data becomes the single most important technical document. Missing or mismatched interface data is the most common cause of installation problems and rework.

Interface AreaData to ExchangeTypical Tolerance / Format

End carriage to girder

Bolt hole pattern, bolt size and grade, connection plate thickness, weld preparation

Hole position ±1 mm; bolt grade 8.8 or 10.9; drawings in DWG or PDF

Wheel to rail

Rail type (QU70, QU80, QU100, A55, A65, etc.), rail head width, wheel tread profile, flange clearance

Flange clearance typically 3–5 mm per side; confirm rail standard (GB/T 3426, DIN 536, ASCE)

Hoist to trolley / girder

Mounting bracket dimensions, bolt pattern, hook approach dimensions, headroom

Approach dimensions are critical for building clearance; confirm with a dimensioned drawing

Electrical connection

Terminal block arrangement, cable entry position, control cable count and size, power cable size

Provide terminal diagrams; confirm cable gland sizes and entry direction

Buffer and end stop

Buffer type (polyurethane, rubber, hydraulic), stroke, mounting height

Confirm runway end stop dimensions and buffer impact speed rating

A practical rule: for every mechanical interface, exchange a dimensioned drawing with at least three reference dimensions and the bolt pattern. For every electrical interface, exchange a terminal list with wire numbers, sizes, and functions.

What Is the MOQ for OEM Crane Orders from China?

Minimum order quantity (MOQ) is one of the first questions many importers ask. The answer depends on the product, manufacturing process, customization level, and whether the order involves standard or made-to-order equipment. There's no universal MOQ for OEM cranes. A supplier may accept a small order for a standard hoist or replacement component but require a larger order for customized products that involve special tooling or dedicated production arrangements.

Standard products and customized products

Product TypeTypical MOQ ConsiderationWhat to Ask the Supplier

Standard hoists

Small quantities may be possible, depending on model and stock availability.

Can you supply one or two units for a trial order?

Standard crane components

Small orders may be accepted, while bulk quantities can offer better unit pricing.

Is there a price difference between sample, small-batch, and wholesale orders?

Customized end carriages

MOQ depends on dimensions, wheel and motor configuration, and manufacturing setup.

Can you manufacture a single customized set before repeat production?

Customized crane kits

Often quoted by set or project rather than a fixed universal MOQ.

Can you supply one complete kit for a first project?

Complete overhead or gantry cranes

Usually quoted according to individual project specifications.

Can you manufacture a single crane based on our drawings and technical requirements?

Can you place a sample or trial order?

Yes — many OEM suppliers can discuss a trial order, especially when the product is a standard component or a repeatable assembly.

A trial order is useful for checking:

  • Manufacturing quality and dimensional accuracy.
  • Component compatibility and installation fit.
  • Motor, gearbox, brake, and electrical configurations.
  • Packaging quality and export documentation.
  • Communication, production coordination, and delivery performance.

For customized products, a sample or first article may involve additional engineering and setup costs. Make sure these charges are clear before confirming the order.

How to negotiate MOQ and wholesale pricing

If your business plans to purchase regularly, explain your expected annual demand rather than negotiating only on the first order.

For example, a crane parts distributor may initially need 5 sets of end carriages but expect to purchase 30–50 sets over the following year. Sharing this purchasing plan can help the manufacturer evaluate material purchasing, production planning, and a possible tiered pricing arrangement.

For repeat OEM orders, also discuss whether the supplier can keep approved drawings, technical specifications, and product configurations on record. This can reduce repeated engineering work and make future orders easier to manage.

Tiered pricing example

The example below shows how tiered pricing typically works for a standardized component such as a 5-ton end carriage set. Actual prices vary by supplier and specification, but the structure is representative.

Order Quantity (sets)Relative Unit PriceTypical Commercial ConditionNotes

1–2 (trial)

100% (baseline)

Full payment before shipment

May include sample or setup charge

5–10

92–96%

30% deposit, 70% before shipment

Standard production scheduling

20–30

85–90%

30% deposit, balance against B/L copy

Material purchased in batch; dedicated production slot

50+ (annual contract)

78–85%

Negotiated milestone payments

Requires forecast commitment and drawing freeze

The key negotiation lever isn't only the quantity but also the forecast reliability. Suppliers can offer better pricing when they can plan material purchasing and production capacity in advance.

How Much Do OEM Crane Customization Costs Add?

Customization is common in the crane industry. Local manufacturers and distributors often need products that fit their own designs, customer requirements, or regional electrical standards.

The important question isn't simply whether customization costs extra. It's which changes affect engineering, materials, production processes, and testing.

Customization AreaExamplesPotential Cost Impact

Dimensions

Span, wheelbase, track gauge, lifting height, mounting dimensions, and connection interfaces

May require revised drawings, structural calculations, special machining, or customized fabrication.

Mechanical configuration

Motor power, gearbox ratio, wheel diameter, brake type, and lifting mechanism

May require different components or a revised mechanical design.

Electrical configuration

Voltage, frequency, control voltage, VFD, radio remote control, and cable arrangement

Depends on the selected electrical components and wiring requirements.

Working environment

Outdoor use, high temperature, humidity, dust, corrosive conditions, and hazardous areas

May require special protection, materials, enclosures, motors, or additional engineering.

Safety and protection

Overload protection, limit switches, anti-collision devices, and explosion-proof configuration

Additional devices and compliance requirements can affect both price and lead time.

Brand and component selection

Specified motor, gearbox, inverter, bearing, or electrical brands

Selected brands, availability, and sourcing requirements affect the final quotation.

Environmental and hazardous-area customization

Environmental requirements are among the most expensive customization categories, and they're frequently underspecified. The table below provides practical reference points.

EnvironmentTypical Required MeasuresRelative Cost ImpactKey Specifications to State

Outdoor / weather-exposed

IP55 or IP65 enclosures, increased paint DFT (200–240 μm), drainage, UV-resistant cable, anti-corrosion hardware

+5% to +15%

Rain, wind, temperature range, and expected service life

High temperature (foundry, steel mill)

Class H insulation, heat shields, high-temperature cable, remote-mounted panels

+10% to +25%

Ambient temperature (e.g., 50°C, 60°C), radiant heat exposure

Dusty / cement / mining

IP65 enclosures, sealed bearings, dust-tight panel with positive pressure or filtration

+8% to +20%

Dust concentration, particle size, cleaning method

Corrosive / coastal / chemical

Hot-dip galvanized or stainless components, epoxy paint system, sealed connectors

+10% to +30%

Corrosion category (C3, C4, C5 per ISO 12944), chemical exposure

Explosion-proof (ATEX / IECEx)

Ex-rated motors, explosion-proof panels, flameproof enclosures, special wiring, certification

+40% to +150% or more

Zone (1, 2, 21, 22), gas/dust group, temperature class, required certification body

Explosion-proof orders deserve particular caution. Not every Chinese crane manufacturer holds valid ATEX or IECEx certification for their Ex-rated crane packages. Always ask for the certificate number and verify the scope covers the exact product configuration being quoted.

Information to prepare before requesting a customized quotation

To avoid repeated technical clarification, provide as much of the following information as possible:

  • Crane type or component name.
  • Rated lifting capacity and working duty.
  • Span, wheelbase, track gauge, and installation dimensions.
  • Lifting height and lifting speed, where applicable.
  • Travel speed and control method.
  • Voltage, frequency, and phase.
  • Indoor or outdoor operating conditions.
  • Required motor, gearbox, brake, and electrical brands.
  • Applicable design standards and certification requirements.
  • Drawings, photographs, or existing product model numbers.

If you have an existing product drawing or a sample, send it with your inquiry. It's usually much easier for an OEM manufacturer to review an actual drawing than to work from a short product description.

What Is the Production Lead Time for OEM Crane Orders?

Production lead time is another important factor when importing overhead crane components or complete crane systems from China. Buyers should distinguish between manufacturing time and total delivery time. A supplier may finish production in a few weeks, but inspection, packaging, export procedures, and international shipping will add time before the goods reach your warehouse or project site.

What affects OEM crane production lead time?

  • Product type: Standard hoists and components may be easier to schedule than customized crane systems.
  • Order quantity: Large orders require more material preparation, production capacity, and assembly time.
  • Customization: Special designs, non-standard dimensions, and customer drawing approval can extend the schedule.
  • Component availability: Imported motors, gearboxes, inverters, and other specified brands may have longer procurement times.
  • Inspection requirements: FAT, load testing, and third-party inspection need to be included in the production plan.
  • Seasonal production demand: Factory workload and material supply conditions can affect the confirmed delivery date.

Typical production stages

A customized OEM crane order normally passes through several stages before shipment.

Production StageMain ActivitiesTypical Duration (Reference)Buyer Action

1. Technical confirmation

Specification review, drawing approval, and supply scope confirmation

3–10 working days

Confirm drawings, technical data, and component brands.

2. Material and component preparation

Steel purchasing, component procurement, and production preparation

5–20 working days (longer for imported brands)

Confirm any specified brands or materials that affect procurement.

3. Manufacturing

Cutting, welding, machining, fabrication, and component assembly

15–40 working days depending on scope

Arrange progress checks if required by the inspection plan.

4. Assembly and testing

Mechanical and electrical assembly, functional checks, and agreed load tests

3–10 working days

Confirm FAT requirements and inspection arrangements.

5. Final inspection and packing

Final checks, documentation, protective treatment, and export packaging

2–7 working days

Review inspection records and packing requirements.

6. Shipment preparation

Container loading, export customs procedures, and shipping arrangements

2–7 working days plus vessel schedule

Confirm shipping documents and destination details.

These durations are indicative reference values for standard industrial cranes. They should be replaced with supplier-confirmed dates in the purchase contract.

Production time is not the same as delivery time

This is an easy point to overlook when comparing suppliers. If one factory quotes a 30-day production period and another quotes 40 days, that doesn't automatically mean the first supplier will deliver the goods to your destination faster.

Ask for a schedule that separates the main stages:

  • Drawing approval and technical confirmation.
  • Material and component procurement.
  • Manufacturing and assembly.
  • Inspection and testing.
  • Export packing and container loading.
  • International transportation and customs clearance.

For project-based orders, ask the supplier to confirm the expected shipment date and identify which activities are included in the quoted production lead time.

Buffer planning for project schedules

For project-based orders, plan the following buffers on top of the supplier's quoted production time:

  • Drawing approval buffer: 1–2 weeks for internal review and customer approval, especially when multiple stakeholders are involved.
  • Inspection buffer: 1–2 weeks if third-party inspection is required, including scheduling and report issuance.
  • Shipping buffer: 1–2 weeks for vessel schedule variability, port congestion, and document handling.
  • Customs buffer: 1–2 weeks for destination clearance, especially for first-time imports or destinations with strict documentation requirements.
  • Installation buffer: 1–2 weeks for unpacking, site preparation, and any interface corrections.

A realistic total planning window for a customized crane kit is often 12–20 weeks from purchase order to site delivery, even when the factory production time is quoted as 6–8 weeks.

Export Packaging for Crane Components and Complete Crane Systems

Proper export packaging matters when shipping crane equipment from China. Some components are heavy and robust, while others contain precision-machined surfaces, electrical parts, or fragile accessories that need additional protection. Packaging should be selected according to the product, transport method, storage conditions, and destination requirements.

Common export packaging methods

Packaging TypeTypical ApplicationKey Considerations

Wooden cases

Hoists, motors, electrical cabinets, precision components, and accessories

Provide protection against impact and handling damage. Confirm wood packaging compliance requirements for the destination.

Steel frames

Large end carriages, structural parts, and heavy crane assemblies

Provide stable support and facilitate lifting and container loading.

Protective wrapping

Machined surfaces, shafts, wheels, and painted components

Protect against dust, moisture, scratches, and corrosion during transportation.

Bulk or pallet packaging

Standard components, small accessories, and selected spare parts

Use clear labeling and secure packing to prevent movement during transit.

Packaging considerations for different crane products

Hoists and motors: Protect electrical connections, shafts, and exposed machined surfaces. Use suitable moisture protection for long-distance sea freight.

End carriages and travel mechanisms: Secure the assemblies to prevent movement. Protect wheels, bearings, and mounting surfaces from impact and corrosion.

Electrical cabinets: Use suitable protective packaging to prevent moisture and handling damage. Keep accessories and wiring documentation properly labeled.

Crane girders and large structures: Check overall dimensions, lifting points, support arrangements, and container suitability before shipment. Oversized components may require special transport arrangements.

Container loading and shipment dimensions

For large crane components, the dimensions of the packed goods can be just as important as their weight. A component that fits within a standard container may be much cheaper to ship than one requiring special handling or out-of-gauge transport.

Before confirming the order, ask the supplier to provide:

  • Number of packages and package dimensions.
  • Gross weight and net weight.
  • Total volume in cubic meters (CBM).
  • Proposed container type, if applicable.
  • Loading arrangement and securing method.
  • Whether any components require special or oversized transportation.

For large crane kits or complete crane systems, it's worth discussing container loading during the quotation stage rather than waiting until production is finished.

Wood packaging compliance reference

Wood packaging is subject to phytosanitary regulations in most countries. The key reference points are:

RequirementReference StandardPractical Note

ISPM 15 treatment

International Standard for Phytosanitary Measures No. 15

Solid wood packaging must be heat-treated (HT) or fumigated (MB) and stamped with the IPPC mark.

EU wood packaging

EU Regulation 2016/2031

ISPM 15 mark required. Bark-free wood strongly recommended.

US wood packaging

USDA APHIS requirements

ISPM 15 mark required for solid wood. Plywood and processed wood are exempt.

Australia / New Zealand

Department of Agriculture requirements

Strict inspection; consider plywood cases to avoid treatment delays.

Middle East / Africa

Varies by country

ISPM 15 is widely accepted; confirm any additional country-specific requirements.

If your supplier uses plywood cases instead of solid wood, the ISPM 15 marking requirement generally doesn't apply, but the cases may be more expensive. This trade-off should be discussed during quotation.

Corrosion protection for sea freight

Sea freight exposes machinery to humidity and salt-laden air. For long transit times or sensitive components, specify:

  • Desiccant bags: sized according to case volume, typically 1 kg of desiccant per 1–2 m³ of sealed case volume.
  • VCI (vapor corrosion inhibitor) film: useful for machined surfaces, bearings, and electrical contacts.
  • Rust-preventive oil or grease: applied to machined surfaces, shafts, and wheel treads.
  • Aluminum foil or barrier bags: for high-value electrical components and control panels.
  • Humidity indicator cards: placed inside cases to verify conditions on arrival.

These measures add modest packaging cost but can prevent substantial rework and warranty claims after arrival.

Shipping Crane Kits and Components from China

International shipping costs depend on the cargo volume, weight, destination, shipping method, and current freight market. For crane components and complete crane systems, sea freight is often the main option, but it's not always the only practical choice.

Which shipping method should you choose?

Shipping MethodSuitable CargoAdvantagesLimitations

Sea freight

Crane components, crane kits, hoists, and complete crane systems

Generally suitable for heavy, bulky, and large-volume shipments.

Longer transit time and additional port handling and customs procedures.

Air freight

Urgent spare parts, small electrical components, and compact accessories

Faster transportation for urgent or high-value small shipments.

Usually more expensive, especially for heavy or oversized cargo.

Courier service

Small spare parts, samples, documents, and lightweight accessories

Convenient for small shipments and door-to-door delivery options.

Size and weight restrictions; less suitable for heavy crane components.

Rail freight

Suitable cargo moving between China and destinations served by available rail routes

Can offer an alternative to sea or air freight for certain destinations.

Availability, route, transit time, and final delivery arrangements vary.

FCL or LCL: which is better for crane equipment?

For sea freight, buyers generally choose between full container load (FCL) and less than container load (LCL).

FCL (Full Container Load) means the shipment uses a dedicated container. It's often suitable for large orders, complete crane kits, and heavy or bulky components.

LCL (Less than Container Load) means your cargo shares container space with goods from other shippers. It can be suitable for smaller orders that don't require a full container.

When comparing FCL and LCL, don't look at the freight rate alone. LCL shipments may involve additional consolidation, handling, and destination charges. For heavy or sensitive crane components, FCL may also offer better control over loading and cargo handling.

Container capacity reference for crane shipments

The table below gives practical loading references for common container types, which is useful for early freight budgeting.

Container TypeInternal Dimensions (approx.)Max Payload (approx.)Practical VolumeTypical Crane Cargo Fit

20' GP

5.9 × 2.35 × 2.39 m

28 t

28–30 m³

Hoists, small end carriages, electrical cabinets, and palletized components

40' GP

12.0 × 2.35 × 2.39 m

28 t

58–60 m³

Larger crane kits, multiple hoists, and longer components

40' HC

12.0 × 2.35 × 2.69 m

28 t

68–70 m³

Taller assemblies and stacked packaging

20' OT / FR

Varies

Varies

Varies

Oversized end carriages or structural components that exceed container width

Payload limits vary by shipping line and route. Always confirm the actual payload limit with the freight forwarder, because road weight limits in the destination country may be lower than the container's rated payload.

What affects international freight costs?

  • Destination country, port, and final delivery location.
  • Total cargo weight and volume.
  • Container type and quantity.
  • Whether the shipment is standard or oversized.
  • Shipping route and available carrier services.
  • Seasonal demand and current freight rates.
  • Port handling, documentation, and local delivery charges.
  • Insurance and any special cargo handling requirements.

For a reliable shipping quotation, provide the supplier or freight forwarder with the destination port, package dimensions, gross weight, cargo volume, and expected ready date.

Chargeable weight and volume rules

For air freight and courier shipments, the chargeable weight is the greater of actual weight and volumetric weight. Common formulas:

  • Air freight: volumetric weight (kg) = length × width × height (cm) ÷ 6,000.
  • Courier / express: volumetric weight (kg) = length × width × height (cm) ÷ 5,000 (varies by carrier).
  • Sea LCL: typically charged by revenue ton (W/M), where 1 revenue ton = 1,000 kg or 1 m³, whichever is greater.

For crane components, sea freight is usually charged on volume rather than weight, so optimizing packaging dimensions can matter as much as reducing weight.

Which Incoterms Should You Use When Importing Cranes from China?

Incoterms define the responsibilities of the buyer and seller for delivery, transportation costs, export and import clearance, and the transfer of risk. They matter when comparing OEM crane quotations because two suppliers may quote different delivery terms.

The following are common options under Incoterms 2020:

IncotermSeller's Main ResponsibilityBuyer's Main ResponsibilityWhen It May Be Suitable

EXW – Ex Works

Makes the goods available at the named place, typically the seller's premises.

Arranges collection, loading as agreed, export clearance, main transport, import clearance, and delivery.

Buyers with their own logistics arrangements and experience handling export procedures.

FOB – Free On Board

Handles export clearance and delivers the goods on board the vessel at the named port of shipment.

Arranges and pays for main sea transport, insurance if desired, import clearance, and onward delivery.

Importers with their own freight forwarders or shipping contracts.

CIF – Cost, Insurance and Freight

Pays for carriage and the required insurance to the named destination port, and handles export clearance and loading on board.

Handles import clearance, duties, taxes, and onward transportation.

Buyers who want the seller to arrange sea freight and insurance to the destination port.

DAP – Delivered at Place

Arranges transportation to the named destination, with goods placed at the buyer's disposal on the arriving means of transport, ready for unloading.

Handles unloading and import clearance, including applicable duties and taxes.

Buyers who prefer the supplier to arrange transportation to a specified destination.

Important: Under CIF, the seller pays for freight and insurance to the named destination port, but the risk transfers to the buyer once the goods are loaded on board the vessel at the port of shipment. Don't assume that the seller carries the transportation risk all the way to the destination port.

Under DAP, the buyer is generally responsible for import clearance and applicable import duties and taxes. If you want the seller to handle import clearance and duties as well, DDP may be worth discussing, provided the seller can legally and practically arrange it in the destination country.

Always specify the named place or port and the applicable Incoterms version in the purchase contract. For example:

  • FOB Shanghai Port, Incoterms 2020.
  • CIF Jebel Ali Port, Incoterms 2020.
  • DAP Customer Warehouse, Dubai, UAE, Incoterms 2020.

For crane equipment, also confirm who is responsible for loading, securing, export packaging, and any special transport arrangements.

Payment Terms for OEM Crane Orders

Payment terms depend on the supplier, order value, product type, and business relationship. For first-time buyers, it's particularly important to agree on payment milestones and documentation before production begins.

Common payment methods

Payment MethodHow It WorksBuyer Considerations

T/T (Telegraphic Transfer)

Payment is transferred through a bank. The contract may specify a deposit and a balance payment before shipment or against agreed documents.

Confirm the beneficiary's company details, payment milestones, and bank information independently.

L/C (Letter of Credit)

A bank undertakes payment subject to the seller presenting documents that comply with the credit terms.

Suitable for some larger international transactions, but document requirements and bank charges need careful review.

Other agreed arrangements

Payment schedules may be negotiated for repeat orders or long-term OEM cooperation.

Define the conditions for each payment stage clearly in the contract.

What should be included in the payment agreement?

Before making a deposit, confirm the following details:

  • Total contract value and currency.
  • Deposit percentage and payment deadline.
  • Balance payment conditions.
  • Production start date and agreed delivery schedule.
  • Inspection and acceptance requirements.
  • Required shipping and commercial documents.
  • Procedure for handling changes, delays, or non-conforming products.

For customized crane orders, link the payment schedule to clearly defined contract milestones where appropriate. For example, technical approval, production completion, inspection, and shipment can be identified as separate stages.

For first-time transactions, verify any changes to bank details through an independent communication channel. Don't rely only on an email requesting a last-minute change to the beneficiary account.

Warranty and After-Sales Support for OEM Crane Products

Warranty terms should be discussed before the order is placed, not after a problem occurs. This is especially important for crane distributors and local manufacturers who may be responsible for supporting their own customers. Warranty coverage can differ between a complete crane system and an individual component. A hoist, motor, brake, gearbox, or electrical control system may have different warranty conditions depending on the contract and manufacturer.

What should the warranty cover?

  • Warranty period and the date from which it starts.
  • Covered manufacturing defects and component failures.
  • Exclusions related to misuse, improper installation, or unauthorized modification.
  • Responsibility for replacement parts and transportation costs.
  • Procedure for submitting a warranty claim.
  • Required inspection records, photographs, and failure reports.

Spare parts and technical support

For overseas buyers, spare parts availability can be just as important as the initial purchase price. A low-cost crane component isn't a good deal if a replacement part takes too long to identify or supply.

Ask the OEM manufacturer whether it can provide:

  • Spare parts lists and component identification numbers.
  • Product drawings and technical documentation.
  • Electrical diagrams and wiring information.
  • Replacement motors, brakes, wheels, and gearboxes.
  • Technical support for installation and troubleshooting.
  • Repeat production based on approved drawings and specifications.

If you're a crane distributor or wholesaler, it's worth agreeing on a spare parts supply arrangement for the products you expect to sell regularly.

Recommended spare parts allowance

A practical way to budget for after-sales support is to include a spare parts allowance with the initial order. The percentages below are commonly used as a starting point for OEM crane orders:

Spare Parts CategoryTypical Allowance (% of unit price)Recommended Items

Fast-wearing mechanical parts

3–5%

Brake linings, brake drums/discs, wheel bearings, rope guides, buffer pads

Electrical consumables

2–4%

Contactors, relays, limit switches, fuses, pendant control units, pushbuttons

Critical long-lead items

1–3%

One motor or one VFD per crane model, one brake assembly per hoist model

Wire rope

1–2%

One spare rope set per high-use hoist

For a distributor building inventory, these allowances can be scaled to expected annual sales volume rather than a single crane order.

Warranty period benchmarks

Warranty periods for Chinese OEM crane products typically fall within the following ranges, although they're negotiable:

  • Complete crane systems: 12–24 months from commissioning or 18–30 months from shipment, whichever comes first.
  • Hoists and major mechanical assemblies: 12–24 months.
  • Electrical components: 12–18 months, sometimes limited by the component manufacturer's warranty.
  • Wear parts (brake linings, ropes, wheels): often excluded or covered for a shorter period.

Always confirm the warranty start date, because "from shipment" and "from commissioning" can differ by several months for project cargo.

How to Calculate the Total Landed Cost of Importing Crane Equipment

The factory quotation isn't the same as the final cost of receiving goods at your warehouse or project site. To evaluate an OEM crane supplier properly, calculate the total landed cost. Landed cost includes the purchase price and the additional costs required to bring the goods to the agreed destination and clear them for use or resale.

Main landed cost components

Cost ItemWhat to Include

Product price

OEM crane components, crane kits, or complete crane systems.

Engineering and customization

Special design, drawings, tooling, prototypes, and non-standard manufacturing.

Inspection and testing

Agreed factory inspection, testing, and third-party inspection fees.

Export packaging

Wooden cases, steel frames, protective wrapping, and special packing.

Inland transportation in China

Transport from the factory to the port or agreed handover location, where applicable.

Export-related charges

Applicable export documentation, handling, and clearance costs, depending on the agreed delivery term.

International freight

Sea, air, rail, or courier transportation.

Insurance

Cargo insurance, if required or included under the agreed delivery term.

Destination charges

Port handling, terminal charges, documentation, and other local fees.

Import duties and taxes

Customs duties, VAT, GST, or other applicable import taxes.

Customs clearance and final delivery

Customs broker fees, local transportation, unloading, and delivery to the warehouse or project site.

A simple landed cost formula

You can use the following formula as a starting point:

Total Landed Cost = Product Price + Applicable Engineering and Inspection Costs + Packaging + Transport and Freight + Insurance + Destination Charges + Import Duties and Taxes + Customs Clearance + Final Delivery

The exact items included depend on the Incoterm. For example, if the quotation is CIF, the seller's price already includes the agreed main freight and insurance to the named destination port. Don't add those costs a second time when calculating landed cost.

Similarly, under DAP, the agreed delivery price generally includes transportation to the named destination, but import clearance and duties remain the buyer's responsibility.

Compare suppliers using the same purchasing conditions

When comparing quotations from different Chinese crane manufacturers, use the same technical specifications, supply scope, inspection requirements, packaging standards, and delivery terms.

For example, a quotation for a 10-ton overhead crane kit should clearly state whether it includes the hoist, trolley, end carriages, motors, electrical cabinet, conductor rail, and other accessories. If one supplier excludes several items, its lower price may not represent a real saving.

For importers and distributors, the landed cost per unit is often more useful than the factory price alone. It gives you a better basis for setting resale prices, calculating margins, and deciding whether to purchase in larger quantities.

Landed cost worked example

The example below illustrates a simplified landed cost calculation for a crane kit. The figures are illustrative and should be replaced with actual quotations.

Cost ItemIllustrative Amount (USD)Notes

Product price (FOB)

25,000

Kit scope as per agreed supply list

Engineering / customization

800

One-time charge

Inspection and testing

500

FAT with load test

Export packaging

600

Wooden cases and steel frame

Inland transport to port

300

Factory to Shanghai port

International sea freight

2,200

40' GP, port-to-port

Marine insurance

150

Approx. 0.5% of CIF value

Destination port charges

450

Terminal handling and documentation

Import duty

1,250

Illustrative 5% of CIF value

VAT / GST

3,000

Illustrative 10–15%; recoverable in some jurisdictions

Customs clearance

300

Broker fee

Final delivery

500

Port to warehouse

Total landed cost

35,050

Excluding recoverable VAT/GST: approximately 32,050

This example shows why the factory price alone isn't a sufficient basis for comparison. In this case, the landed cost is roughly 40% higher than the FOB product price before considering recoverable taxes.

What Information Should You Prepare Before Requesting an OEM Crane Quotation?

A complete inquiry helps the manufacturer prepare a more accurate quotation. It also reduces the time spent going back and forth to confirm basic technical details. Use the following checklist when contacting a Chinese OEM crane manufacturer or crane component supplier.

Technical information

  • Product name and crane type.
  • Rated lifting capacity, if applicable.
  • Span, lifting height, wheelbase, and other key dimensions.
  • Working duty or duty classification.
  • Motor, gearbox, brake, and electrical requirements.
  • Voltage, frequency, and phase.
  • Operating environment and protection requirements.
  • Required standards, certificates, and inspection scope.
  • Technical drawings, photographs, or reference models.

Commercial information

  • Estimated order quantity.
  • Whether the order is a trial purchase or a repeat OEM order.
  • Required delivery date.
  • Destination country and preferred port.
  • Preferred Incoterm, such as FOB, CIF, or DAP.
  • Required packaging and shipping method.
  • Preferred payment terms.
  • Any special documentation or warranty requirements.

A practical OEM crane inquiry example

Here's an example of what a local crane manufacturer looking for an overhead crane kit could send:

Inquiry ItemExample Requirement

Product

Double girder overhead crane kit

Rated capacity

20 ton

Span

18 m

Lifting height

10 m

Working duty

To be confirmed according to the actual load spectrum and operating hours

Power supply

400V, 50Hz, 3-phase

Control

Radio remote control and pendant control

Supply scope

Hoisting trolley, end carriages, travel mechanisms, and electrical control system; bridge girders supplied locally

Quantity

2 sets

Destination

Customer's destination port to be confirmed

Quotation terms

FOB and CIF options requested

This level of detail gives the supplier a much clearer basis for pricing. It also makes it easier to compare quotations from different OEM crane manufacturers in China.

Technical standards and certification reference

Different markets reference different crane design and safety standards. The table below summarizes the most common ones, which should be stated in the inquiry when relevant.

Region / MarketCommon Crane Design StandardElectrical StandardCertification / Mark

China

GB/T 3811, GB/T 14405, GB/T 14406

GB 5226.1 / IEC 60204-32

Manufacturing license (TSG), type test report

Europe

EN 15011, EN 13001, FEM 9.511

EN 60204-32

CE marking, Declaration of Conformity, sometimes notified body involvement

North America

ASME B30.2, CMAA 70/74

NFPA 70 (NEC), UL 508A for panels

NRTL listing for electrical components, CSA where applicable

Australia / New Zealand

AS 1418.1, AS 1418.18

AS/NZS 3000, AS 60204.32

Design registration in some states, RCM marking

Middle East

Often EN or ASME basis, project-specific

IEC-based, project-specific

Consultant-approved vendor list, third-party inspection

Latin America

Often EN or ASME basis, local NR standards

IEC or NEMA, project-specific

Local NR-12 (Brazil) or equivalent, project inspection

For North American and European markets, confirm early whether the supplier can provide the required certification documentation. Retrofitting certification after manufacturing is expensive and sometimes impossible.

Frequently Asked Questions About OEM Crane Orders from China

Below are the most common questions buyers ask when placing OEM crane orders from China, covering costs, MOQ, lead times, Incoterms, crane kit scope, bulk pricing, documentation, tolerances, supplier verification, and spare parts for discontinued models.

How much does it cost to import crane components from China?

The cost depends on the component type, specifications, order quantity, customization requirements, packaging, and destination. The factory price is only part of the total. Buyers should also calculate freight, insurance where applicable, customs duties, destination charges, and final delivery costs.

What is the minimum order quantity for OEM crane products?

There's no fixed MOQ for all crane products. Standard hoists and components may be available in small quantities, while customized end carriages, crane kits, and special assemblies may require additional setup or engineering. Ask the manufacturer for pricing at different order quantities.

Can I order one overhead crane or one crane kit from China?

Yes. Many manufacturers can quote individual project orders, including one complete overhead crane or one crane kit. The final price depends on the design, specifications, and supply scope.

How long does it take to manufacture customized overhead crane components?

Lead time depends on the product, order quantity, material availability, component brands, and customization requirements. Ask the supplier to separate technical approval, procurement, manufacturing, testing, and packing in the production schedule.

Can a Chinese OEM manufacturer produce crane components according to my drawings?

Many OEM manufacturers can review customer drawings and manufacture products to agreed specifications. Before production, confirm dimensions, tolerances, materials, component interfaces, manufacturing responsibilities, and inspection criteria.

Is FOB or CIF better when importing cranes from China?

Neither term is automatically better. FOB may suit buyers who have their own freight forwarder and shipping arrangements. CIF may be convenient when the seller arranges sea freight and insurance to the destination port. Compare the complete cost and understand when risk transfers under each Incoterm.

What is included in a crane kit price?

There's no universal supply scope. A crane kit may include a hoisting trolley, end carriages, travel drives, motors, brakes, and electrical equipment. Some kits may exclude the bridge girders, runway equipment, conductor rails, or installation materials. Always request a detailed supply list.

Can I get a better price by placing a bulk order?

Bulk orders may reduce unit costs because material purchasing, setup, and production costs can be distributed across more units. The actual saving depends on the product, production process, component availability, and order schedule. Ask for tiered pricing at different quantities.

What documents should I request before shipment?

Depending on the product and contract, documents may include the commercial invoice, packing list, bill of lading, certificate of origin, inspection reports, test records, drawings, operation manuals, and applicable certificates. Confirm the exact document list before production is completed.

How can I reduce the total cost of importing crane products?

Start by confirming the technical specifications and supply scope. Compare suppliers on a like-for-like basis, avoid unnecessary customization, discuss bulk or repeat-order pricing, optimize packaging and container loading, and compare shipping options. Most importantly, calculate the total landed cost rather than choosing a supplier based only on the lowest factory quotation.

What tolerances are typical for OEM crane components?

Typical manufacturing tolerances for crane components include: span ±3 mm for box girders under 20 m and ±5 mm for longer spans; wheelbase ±2 mm; track gauge ±3 mm; bolt hole position ±1 mm; and shaft diameter per ISO 286 IT7 or IT8 depending on fit. These should be confirmed in the technical agreement, because tighter tolerances add machining cost.

How do I verify the quality of a Chinese OEM crane supplier?

Request the supplier's manufacturing license, ISO 9001 certificate, product type test reports, and references from similar export projects. Arrange a factory audit or third-party inspection before shipment. Review the supplier's welding procedure specifications, non-destructive testing records, and FAT documentation. For critical components, request material certificates and component brand certificates.

Can the supplier provide installation drawings and manuals in my language?

Many exporters provide English drawings and manuals as standard. Other languages can often be arranged at additional cost and with longer document preparation time. Confirm the required language, document format, and delivery date in the purchase contract.

What is the difference between design life and warranty period?

Design life is the calculated service life of the crane or component under specified duty conditions, typically expressed in years or load cycles. Warranty period is the contractual period during which the supplier covers specified defects. A crane with a 25-year design life may still have a 12- or 24-month warranty. Both should be stated separately in the technical agreement.

How should I handle spare parts for discontinued models?

Ask the supplier how long it will keep drawings and tooling for your ordered configuration. A common arrangement is a commitment to supply spare parts for 10–15 years after the last production run. For customized components, confirm that approved drawings will be archived and available for repeat production.

Source OEM Crane Components and Complete Crane Systems from Yuantai Crane

Yuantai Crane has been manufacturing lifting equipment since 1984, serving industrial projects and customers in more than 220 countries and areas. Our product range covers overhead cranes, gantry cranes, jib cranes, hoists, crane kits, and a wide selection of crane components.

For overseas crane distributors, importers, wholesalers, and local manufacturers, we can discuss OEM supply based on your product drawings, technical specifications, component requirements, and order quantities.

Whether you need individual crane parts, customized end carriages, complete hoisting mechanisms, or a full overhead crane kit, the first step is to define the supply scope and technical requirements clearly.

To request an OEM crane quotation, please provide:

  • Product name, model, or technical drawing.
  • Required specifications and component brands.
  • Estimated order quantity.
  • Destination country and preferred shipping port.
  • Expected delivery schedule.
  • Any special OEM, packaging, inspection, or documentation requirements.

Our engineering team can review your requirements and help clarify the product configuration, manufacturing scope, and quotation details.

Request an OEM Crane Quotation

Send your drawings, BOM, product specifications, or project requirements to Yuantai Crane. We will review the details and discuss a suitable manufacturing and supply arrangement for your business.

Yuantai Crane – China OEM Crane Manufacturer

Related Articles

Reference articles for overseas crane companies evaluating Chinese OEM manufacturing, covering cooperation models, kit vs. local manufacturing decisions, brand building, sourceable products, supplier selection, technical requirements, quality control, and order pricing.

Focus: Explain OEM manufacturing, how overseas companies cooperate with Chinese crane factories, what can be manufactured, and how the cooperation works.

Why it matters: Buyers need to understand whether they can use a Chinese factory as a manufacturing partner without building their own production facilities or giving up their local market and brand.

Target buyers: Local crane manufacturers, crane engineering companies, established crane distributors, and companies planning to launch their own crane product range.

Focus: Compare three business models: local manufacturing, importing complete cranes, and importing crane kits or major components for local assembly.

Why it matters: This is a practical investment decision. Buyers want to know which parts they should manufacture themselves and which parts are more suitable to source from China.

Focus: Private-label manufacturing, customer branding, nameplates, drawings, product specifications, packaging, warranty, and division of responsibilities.

Why it matters: Buyers may have their own customers and sales channels but lack the manufacturing capacity to produce every crane or component themselves. They need to know whether they can sell products under their own brand.

Focus: Explain the products buyers can source: end carriages, hoists, trolleys, travel mechanisms, wheels, motors, brakes, electrical systems, crane kits, and complete overhead and gantry cranes.

Why it matters: Many buyers know they want to source from China but are unsure how much of the crane manufacturing process they can outsource. This article helps them identify the products relevant to their business.

Focus: Factory capability, engineering team, manufacturing processes, welding and machining, assembly, testing, export experience, and supplier verification.

Why it matters: Overseas buyers face difficulty distinguishing a real manufacturer from a trading company or a supplier that outsources most of the work. They need evidence of manufacturing and engineering capability.

Focus: What buyers need to provide before production: GA drawings, capacity, span, lifting height, duty class, wheel loads, connection dimensions, motors, electrical requirements, operating environment, and applicable standards.

Why it matters: Incomplete specifications cause quotation delays, design changes, component mismatches, and problems during local assembly. This article helps buyers prepare a useful technical inquiry.

Focus: Incoming material inspection, welding, machining, component verification, assembly, functional testing, load testing where applicable, FAT, inspection reports, and third-party inspection.

Why it matters: The buyer may not be present during manufacturing. They need to know what evidence to request and how to check that the delivered products match the approved drawings and specifications.

Focus: How OEM prices are calculated, customization costs, minimum order quantities, sample orders, production lead times, export packaging, freight, Incoterms, payment terms, and warranty.

Why it matters: Buyers need to calculate the total purchasing cost, not just the factory quotation. They also need to understand whether their order volume and delivery requirements are practical.

Article by Bella ,who has been in the hoist and crane field since 2016. Bella provides overhead crane & gantry crane consultation services for clients who need a customized overhead travelling crane solution.Contact her to get free consultation.


Yuantai Cranes

Overhead Crane Manufacturer with CE, ISO, SGS, CNEX Certificates.

  • Main Specifications - Capacity: 0.5–550 tons | Span: up to 40m | Speed: 0.8–12 m/min | Duty: A3–A7 | Power: 380–690V, 50/60Hz | Control: pendant/remote/cabin
  • Full engineering: FEA/PLC/VFD + in-house build + global delivery + on-site support, for workshops, factories, EPC contractors, industrial projects, etc.
  • Support: design, manufacturing, testing, service – end-to-end, customized lifting solutions worldwide.

How to Get an Accurate Crane Price for Your Application?
Tips: Copy the spec list, fill in your details, and paste it into the form on the right/ down-below for a quick price.

  • Crane type:_____ . (e.g., overhead crane, gantry crane, jib crane)
  • Max weight to lift:_____ tons. (e.g., 2t, 5t, 10t, 20t, 50t)
  • Lifting height:_____ m. (How high does the hook need to reach?
  • Workshop width (span):_____ m . (Distance between the two crane rails)
  • Travel distance:_____ m . (How long does the crane need to move along the runway?)
  • Control type:_____. (Pendant / remote / cabin Control)
  • Power supply:_____. (Local voltage & frequency – e.g., 380V, 50Hz, 3-phase)
  • What will it be used for?_____ (e.g., steel fabrication, concrete products, mold handling, general manufacturing, etc.)
  • Any special requirements?_____ (e.g., extreme temperature, dusty or explosive environment, special paint color, etc.)

Just leave a message via the contact form and our hoist and crane engineer will contact you with in 24working hours.

Get Your Custom Quote–Quick & Easy

Fill in what you know. Skip what you don't – we'll help.Any question will be reply with 24 working hours